Plate mounting tape 0.3mm ORAFLEX 11397
ORAFLEX 11397 is a double-side hard tape with 300μm (0.3mm) thickness. This tape is mostly used to mount photopolymer plate onto printing cylinders for flexo/letter-press of fabric textile label printing.
ORAFLEX 11397 is designed with balanced adhesion levels to give good plate security while allowing distortion-free repositioning and demounting.
The adhesive are produced to remove clearly and without residues from cylinders after use.
Technical Data sheet for plate mounting tape 0.3mm – ORAFLEX 11397:
Thickness | 300 micron (12 mil) |
Liner | Creped PP film, 80 micron, green |
Carrier | PP transparent film for easy positioning |
Adhesive | Nature rubber, both sides |
Size | 310mm x 25m |
GUDi is genuine and exclusive distributor in Vietnam of solid mounting tape – ORAFLEX 0.3mm – from ORAFOL (Germany) for textile label flexo printing & letterpress printing. Please contact hotline: 0906.662.990 | hiep.nguyen@gudi.vn for further information & samples.
Product pictures at GUDi:
RELATED PRODUCTS
Plate mounting tape 0.5mm ORAFLEX 116XX
ORAFLEX 116XX is a range of 0.5mm double-side plate mounting tapes which is designed for wide-web flexo printing with 3 different hardness & 5 combinations of adhesive levels on plate & sleeve/cylinder.
Made in Germany
Plate mounting tape 0.38mm ORAFLEX 115XX
ORAFLEX 115XX is a range of 0.38mm double-side plate mounting tapes which is developed for label flexo printing with 3 different hardness & 5 combinations of adhesive levels on plate & cylinder.
Made in Germany
PLATE MOUNTING TAPE 0.31MM ORAFLEX 1142
The double-sided adhesive tape solutions ORAFLEX® 1142 is a flexible fabric carrier coated on both sides with acrylate adhesive, which guarantees that the rubber printing blankets adhere optimally and that accurate printing can therefore take place.
Made in Germany