PLATE MOUNTING TAPE 0.38MM ORAFLEX 11409
Description
This double-sided tape consists of a flexible scrim carrier and is coated on both sides with an acrylic adhesive. The tape features a very good resistance to ageing and ultraviolet radiation. Due to its high adhesive loading it shows outstanding initial tack and final adhesion, especially to rough and structured surfaces. The adhesive is lined with silicone paper and a white HDPE-film with a low coefficient of friction.
Carrier
Rayon (white, translucent)
Liner
Double-sided siliconised paper (90 g/m2, yellow)
HDPE-film, single-side siliconised (50 µm, white)
Adhesive
Modified dispersion acrylate
Area of use
Mounting of rubber printing plates and blankets in the flexographic printing industry. The high adhesive mass secures a good bonding to mounting films and print cylinders. Suitable as a self-adhesive medium for printing blankets as well as synthetic profiles and rubber mouldings.
Technical Data
Thickness* (carrier + adhesive) | 380 micron |
Temperature resistance*** | -40° C to +80° C |
Adhesive power* (FINAT TM 1, on stainless steel, one side covered with 50 micron polyester film) |
after 1 min: 14N/25mm after 20 min: 16N/25mm after 24 h: 18N/25mm |
Shear strength* (FINAT TM 8, on stainless steel, one side covered with 50 micron polyester film) |
at 23° C: > 6 h |
Shelf life** | 2 years |
Application temperature | > +15° C |
Data sheets & download
Technical Data Sheet, Article Information
GUDi is genuine and exclusive distributor in Vietnam of flexo mounting tape – ORAFLEX 0.38mm – from ORAFOL (Germany). Please contact hotline: 0906.662.990 | hiep.nguyen@gudi.vn for further information & samples.
Description
This double-sided tape consists of a flexible scrim carrier and is coated on both sides with an acrylic adhesive. The tape features a very good resistance to ageing and ultraviolet radiation. Due to its high adhesive loading it shows outstanding initial tack and final adhesion, especially to rough and structured surfaces. The adhesive is lined with silicone paper and a white HDPE-film with a low coefficient of friction.
Carrier
Rayon (white, translucent)
Liner
Double-sided siliconised paper (90 g/m2, yellow)
HDPE-film, single-side siliconised (50 µm, white)
Adhesive
Modified dispersion acrylate
Area of use
Mounting of rubber printing plates and blankets in the flexographic printing industry. The high adhesive mass secures a good bonding to mounting films and print cylinders. Suitable as a self-adhesive medium for printing blankets as well as synthetic profiles and rubber mouldings.
Technical Data
Thickness* (carrier + adhesive) | 380 micron |
Temperature resistance*** | -40° C to +80° C |
Adhesive power* (FINAT TM 1, on stainless steel, one side covered with 50 micron polyester film) |
after 1 min: 14N/25mm after 20 min: 16N/25mm after 24 h: 18N/25mm |
Shear strength* (FINAT TM 8, on stainless steel, one side covered with 50 micron polyester film) |
at 23° C: > 6 h |
Shelf life** | 2 years |
Application temperature | > +15° C |
Data sheets & download
Technical Data Sheet, Article Information
GUDi is genuine and exclusive distributor in Vietnam of flexo mounting tape – ORAFLEX 0.38mm – from ORAFOL (Germany). Please contact hotline: 0906.662.990 | hiep.nguyen@gudi.vn for further information & samples.
Description
This double-sided tape consists of a flexible scrim carrier and is coated on both sides with an acrylic adhesive. The tape features a very good resistance to ageing and ultraviolet radiation. Due to its high adhesive loading it shows outstanding initial tack and final adhesion, especially to rough and structured surfaces. The adhesive is lined with silicone paper and a white HDPE-film with a low coefficient of friction.
Carrier
Rayon (white, translucent)
Liner
Double-sided siliconised paper (90 g/m2, yellow)
HDPE-film, single-side siliconised (50 µm, white)
Adhesive
Modified dispersion acrylate
Area of use
Mounting of rubber printing plates and blankets in the flexographic printing industry. The high adhesive mass secures a good bonding to mounting films and print cylinders. Suitable as a self-adhesive medium for printing blankets as well as synthetic profiles and rubber mouldings.
Technical Data
Thickness* (carrier + adhesive) | 380 micron |
Temperature resistance*** | -40° C to +80° C |
Adhesive power* (FINAT TM 1, on stainless steel, one side covered with 50 micron polyester film) |
after 1 min: 14N/25mm after 20 min: 16N/25mm after 24 h: 18N/25mm |
Shear strength* (FINAT TM 8, on stainless steel, one side covered with 50 micron polyester film) |
at 23° C: > 6 h |
Shelf life** | 2 years |
Application temperature | > +15° C |
Data sheets & download
Technical Data Sheet, Article Information
GUDi is genuine and exclusive distributor in Vietnam of flexo mounting tape – ORAFLEX 0.38mm – from ORAFOL (Germany). Please contact hotline: 0906.662.990 | hiep.nguyen@gudi.vn for further information & samples.
Description
This double-sided tape consists of a flexible scrim carrier and is coated on both sides with an acrylic adhesive. The tape features a very good resistance to ageing and ultraviolet radiation. Due to its high adhesive loading it shows outstanding initial tack and final adhesion, especially to rough and structured surfaces. The adhesive is lined with silicone paper and a white HDPE-film with a low coefficient of friction.
Carrier
Rayon (white, translucent)
Liner
Double-sided siliconised paper (90 g/m2, yellow)
HDPE-film, single-side siliconised (50 µm, white)
Adhesive
Modified dispersion acrylate
Area of use
Mounting of rubber printing plates and blankets in the flexographic printing industry. The high adhesive mass secures a good bonding to mounting films and print cylinders. Suitable as a self-adhesive medium for printing blankets as well as synthetic profiles and rubber mouldings.
Technical Data
Thickness* (carrier + adhesive) | 380 micron |
Temperature resistance*** | -40° C to +80° C |
Adhesive power* (FINAT TM 1, on stainless steel, one side covered with 50 micron polyester film) |
after 1 min: 14N/25mm after 20 min: 16N/25mm after 24 h: 18N/25mm |
Shear strength* (FINAT TM 8, on stainless steel, one side covered with 50 micron polyester film) |
at 23° C: > 6 h |
Shelf life** | 2 years |
Application temperature | > +15° C |
Data sheets & download
Technical Data Sheet, Article Information
GUDi is genuine and exclusive distributor in Vietnam of flexo mounting tape – ORAFLEX 0.38mm – from ORAFOL (Germany). Please contact hotline: 0906.662.990 | hiep.nguyen@gudi.vn for further information & samples.
RELATED PRODUCTS
Plate mounting tape 0.5mm ORAFLEX 116XX
ORAFLEX 116XX is a range of 0.5mm double-side plate mounting tapes which is designed for wide-web flexo printing with 3 different hardness & 5 combinations of adhesive levels on plate & sleeve/cylinder.
Made in Germany
Plate mounting tape 0.38mm ORAFLEX 115XX
ORAFLEX 115XX is a range of 0.38mm double-side plate mounting tapes which is developed for label flexo printing with 3 different hardness & 5 combinations of adhesive levels on plate & cylinder.
Made in Germany
(Tiếng Việt) Băng keo dán bản in 0.5mm ORAFLEX 118XX
(Tiếng Việt) ORAFLEX 118XX là dòng băng keo dán bản in 0.5mm thế hệ mới với 3 loại độ cứng và 3 loại độ dính trên trục in đáp ứng phong phú các yêu cầu in khác nhau trong in flexo khổ vừa & khổ rộng.
Sản xuất tại Đức